PlayStation 5 HDMI Port Replacement

Playstation 5 HDMI Port Replacement (FixMY – Pleasant Grove, UT)

If your PlayStation 5 shows “No Signal,” a black screen, flickering video, or cuts out when the HDMI cable is touched, the HDMI port is often the culprit. The PS5’s HDMI connector can be damaged by accidental drops, tension on the cable, or frequent plugging/unplugging. In this repair case study, we performed a PS5 HDMI port replacement at FixMY in Pleasant Grove, Utah, and verified stable video output after the repair.

Common signs of a bad PS5 HDMI port

A failing or physically damaged HDMI port can show up in a few different ways:

• No Signal on the TV/monitor even though the console powers on
• Intermittent display (video cuts in/out when the cable moves)
• Flickering, green/purple artifacts, or snow/static
• Bent pins or a loose connector that doesn’t hold the cable firmly
• Visible damage around the HDMI opening from a drop or impact

If you’re seeing these symptoms, replacing the HDMI port is usually the correct fix — but only after confirming the issue isn’t a bad cable, TV input, or a deeper board-level fault.

Diagnosis and inspection

For this PS5 HDMI repair, we:

• Inspected the HDMI connector for pin damage, looseness, and housing deformation
• Checked for lifted pads, torn traces, or damaged filters near the HDMI circuit (damage here can happen when a port is ripped or previously attempted)
• Verified supporting components were in-spec so the repair would be reliable long-term

This inspection step matters because a simple “port swap” isn’t always enough if the board has pad/trace damage.

HDMI port replacement process

A proper PS5 HDMI port replacement is a precision board-level job. Our process includes:

1. Safe removal of the damaged HDMI port using controlled heat and proper shielding
2. Cleaning and preparing the board to avoid stress on surrounding components
3. Repairing any pad/trace issues if found (when required)
4. Installing a new HDMI port with correct alignment and solid anchoring
5. Reflowing and inspecting all joints to ensure consistent connectivity and durability

This is exactly the kind of micro-soldering work where experience and the right tooling make a big difference in reliability.

Testing and quality checks

After installation, we verify the console behaves exactly as expected:

• Confirm stable video output at normal resolution and 4K where applicable
• Ensure the HDMI cable seats firmly with no intermittent signal
• Run functional checks to confirm consistent output across reboots and movement

Result

This PlayStation 5 is back to stable HDMI video output after the port replacement and testing. If your PS5 has similar symptoms, we can diagnose it quickly and let you know whether it’s an HDMI port issue or something deeper on the HDMI circuit.

Need a PS5 HDMI port replacement in Utah?

FixMY provides professional PS5 HDMI repair and HDMI port replacement in Pleasant Grove, UT. If your console has no signal, flickers, or the HDMI port is loose/bent, reach out and we’ll get you taken care of.

Book a repair or contact us for a fast assessment.